Heavy-duty 2" construction trash pump
Specially designed for job sites and applications where high volume trash water capacity is needed.
Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Solid handling capability up to 13/16"
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Easy quick clean out port
The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
Replaceable stainless steel wear plate
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
Standard service tool
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
Durable silicon carbide mechanical seal
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
Cast iron volute and impeller
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from ?walking? away or ?burying? itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Unique conical shaped impeller
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
3 year residential/commercial warranty
You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
Protected by Honda Oil Alert?
Protects the pump by shutting the engine off when low oil is detected.
Large heavy duty metal strainer
The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
|Bore and stroke
||2.7" x 1.8"
||Trash Centrifugal Self-priming
||Rigid Mounted Cast Iron w/ Stainless Wear Plate
||Conical Cast Iron
|Mechanical Seal (Pump case / impeller)
||Silicon Carbide/Silicon Carbide
||60 sec. @ 16.4 ft.
|Suction port diameter
|Discharge port diameter
|Total head lift
|Suction head lift
||24.4" x 18.1" x 18.3"
|Run Time @ Max Discharge
|Strainer Part #
*Offer good on any new Honda HRN, HRS, and HRX Series lawn mower purchased April 1 through June 30, 2020. Offer valid for residential use only. Register your new mower within 30 days after purchase and receive an additional one year to the Honda 3-Year Warranty for HRN and HRS Series or Honda 5-Year Warranty on the HRX Series. CALIFORNIA RESIDENTS ONLY: Failure to register your product will not diminish your warranty rights. Go to powerequipment.honda.com to see warranty details and register your Honda mower.